hugo/hugolib/pagemeta/page_frontmatter_test.go

262 lines
7.7 KiB
Go
Raw Normal View History

hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
// Copyright 2018 The Hugo Authors. All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package pagemeta
import (
"fmt"
"strings"
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
"testing"
"time"
"github.com/spf13/viper"
"github.com/stretchr/testify/require"
)
func TestDateAndSlugFromBaseFilename(t *testing.T) {
t.Parallel()
assert := require.New(t)
tests := []struct {
name string
date string
slug string
}{
{"page.md", "0001-01-01", ""},
{"2012-09-12-page.md", "2012-09-12", "page"},
{"2018-02-28-page.md", "2018-02-28", "page"},
{"2018-02-28_page.md", "2018-02-28", "page"},
{"2018-02-28 page.md", "2018-02-28", "page"},
{"2018-02-28page.md", "2018-02-28", "page"},
{"2018-02-28-.md", "2018-02-28", ""},
{"2018-02-28-.md", "2018-02-28", ""},
{"2018-02-28.md", "2018-02-28", ""},
{"2018-02-28-page", "2018-02-28", "page"},
{"2012-9-12-page.md", "0001-01-01", ""},
{"asdfasdf.md", "0001-01-01", ""},
}
for i, test := range tests {
expectedDate, err := time.Parse("2006-01-02", test.date)
assert.NoError(err)
errMsg := fmt.Sprintf("Test %d", i)
gotDate, gotSlug := dateAndSlugFromBaseFilename(test.name)
assert.Equal(expectedDate, gotDate, errMsg)
assert.Equal(test.slug, gotSlug, errMsg)
}
}
func newTestFd() *FrontMatterDescriptor {
return &FrontMatterDescriptor{
Frontmatter: make(map[string]interface{}),
Params: make(map[string]interface{}),
Dates: &PageDates{},
PageURLs: &URLPath{},
}
}
func TestFrontMatterNewConfig(t *testing.T) {
assert := require.New(t)
cfg := viper.New()
cfg.Set("frontmatter", map[string]interface{}{
"date": []string{"publishDate", "LastMod"},
"Lastmod": []string{"publishDate"},
"expiryDate": []string{"lastMod"},
"publishDate": []string{"date"},
})
fc, err := newFrontmatterConfig(cfg)
assert.NoError(err)
assert.Equal([]string{"publishdate", "pubdate", "published", "lastmod", "modified"}, fc.date)
assert.Equal([]string{"publishdate", "pubdate", "published"}, fc.lastmod)
assert.Equal([]string{"lastmod", "modified"}, fc.expiryDate)
assert.Equal([]string{"date"}, fc.publishDate)
// Default
cfg = viper.New()
fc, err = newFrontmatterConfig(cfg)
assert.NoError(err)
assert.Equal([]string{"date", "publishdate", "pubdate", "published", "lastmod", "modified"}, fc.date)
assert.Equal([]string{":git", "lastmod", "modified", "date", "publishdate", "pubdate", "published"}, fc.lastmod)
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
assert.Equal([]string{"expirydate", "unpublishdate"}, fc.expiryDate)
assert.Equal([]string{"publishdate", "pubdate", "published", "date"}, fc.publishDate)
// :default keyword
cfg.Set("frontmatter", map[string]interface{}{
"date": []string{"d1", ":default"},
"lastmod": []string{"d2", ":default"},
"expiryDate": []string{"d3", ":default"},
"publishDate": []string{"d4", ":default"},
})
fc, err = newFrontmatterConfig(cfg)
assert.NoError(err)
assert.Equal([]string{"d1", "date", "publishdate", "pubdate", "published", "lastmod", "modified"}, fc.date)
assert.Equal([]string{"d2", ":git", "lastmod", "modified", "date", "publishdate", "pubdate", "published"}, fc.lastmod)
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
assert.Equal([]string{"d3", "expirydate", "unpublishdate"}, fc.expiryDate)
assert.Equal([]string{"d4", "publishdate", "pubdate", "published", "date"}, fc.publishDate)
}
func TestFrontMatterDatesHandlers(t *testing.T) {
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
assert := require.New(t)
for _, handlerID := range []string{":filename", ":fileModTime", ":git"} {
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
cfg := viper.New()
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
cfg.Set("frontmatter", map[string]interface{}{
"date": []string{handlerID, "date"},
})
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
handler, err := NewFrontmatterHandler(nil, cfg)
assert.NoError(err)
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
d1, _ := time.Parse("2006-01-02", "2018-02-01")
d2, _ := time.Parse("2006-01-02", "2018-02-02")
d := newTestFd()
switch strings.ToLower(handlerID) {
case ":filename":
d.BaseFilename = "2018-02-01-page.md"
case ":filemodtime":
d.ModTime = d1
case ":git":
d.GitAuthorDate = d1
}
d.Frontmatter["date"] = d2
assert.NoError(handler.HandleDates(d))
assert.Equal(d1, d.Dates.Date)
assert.Equal(d2, d.Params["date"])
d = newTestFd()
d.Frontmatter["date"] = d2
assert.NoError(handler.HandleDates(d))
assert.Equal(d2, d.Dates.Date)
assert.Equal(d2, d.Params["date"])
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
}
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
}
func TestFrontMatterDatesCustomConfig(t *testing.T) {
t.Parallel()
assert := require.New(t)
cfg := viper.New()
cfg.Set("frontmatter", map[string]interface{}{
"date": []string{"mydate"},
"lastmod": []string{"publishdate"},
"publishdate": []string{"publishdate"},
})
handler, err := NewFrontmatterHandler(nil, cfg)
assert.NoError(err)
testDate, err := time.Parse("2006-01-02", "2018-02-01")
assert.NoError(err)
d := newTestFd()
d.Frontmatter["mydate"] = testDate
testDate = testDate.Add(24 * time.Hour)
d.Frontmatter["date"] = testDate
testDate = testDate.Add(24 * time.Hour)
d.Frontmatter["lastmod"] = testDate
testDate = testDate.Add(24 * time.Hour)
d.Frontmatter["publishdate"] = testDate
testDate = testDate.Add(24 * time.Hour)
d.Frontmatter["expirydate"] = testDate
assert.NoError(handler.HandleDates(d))
assert.Equal(1, d.Dates.Date.Day())
assert.Equal(4, d.Dates.Lastmod.Day())
assert.Equal(4, d.Dates.PublishDate.Day())
assert.Equal(5, d.Dates.ExpiryDate.Day())
assert.Equal(d.Dates.Date, d.Params["date"])
assert.Equal(d.Dates.Date, d.Params["mydate"])
assert.Equal(d.Dates.PublishDate, d.Params["publishdate"])
assert.Equal(d.Dates.ExpiryDate, d.Params["expirydate"])
assert.False(handler.IsDateKey("date")) // This looks odd, but is configured like this.
assert.True(handler.IsDateKey("mydate"))
assert.True(handler.IsDateKey("publishdate"))
assert.True(handler.IsDateKey("pubdate"))
}
func TestFrontMatterDatesDefaultKeyword(t *testing.T) {
t.Parallel()
assert := require.New(t)
cfg := viper.New()
cfg.Set("frontmatter", map[string]interface{}{
"date": []string{"mydate", ":default"},
"publishdate": []string{":default", "mypubdate"},
})
handler, err := NewFrontmatterHandler(nil, cfg)
assert.NoError(err)
testDate, _ := time.Parse("2006-01-02", "2018-02-01")
d := newTestFd()
d.Frontmatter["mydate"] = testDate
d.Frontmatter["date"] = testDate.Add(1 * 24 * time.Hour)
d.Frontmatter["mypubdate"] = testDate.Add(2 * 24 * time.Hour)
d.Frontmatter["publishdate"] = testDate.Add(3 * 24 * time.Hour)
assert.NoError(handler.HandleDates(d))
assert.Equal(1, d.Dates.Date.Day())
assert.Equal(2, d.Dates.Lastmod.Day())
assert.Equal(4, d.Dates.PublishDate.Day())
assert.True(d.Dates.ExpiryDate.IsZero())
}
func TestExpandDefaultValues(t *testing.T) {
assert := require.New(t)
assert.Equal([]string{"a", "b", "c", "d"}, expandDefaultValues([]string{"a", ":default", "d"}, []string{"b", "c"}))
assert.Equal([]string{"a", "b", "c"}, expandDefaultValues([]string{"a", "b", "c"}, []string{"a", "b", "c"}))
assert.Equal([]string{"b", "c", "a", "b", "c", "d"}, expandDefaultValues([]string{":default", "a", ":default", "d"}, []string{"b", "c"}))
}
func TestFrontMatterDateFieldHandler(t *testing.T) {
t.Parallel()
assert := require.New(t)
handlers := new(frontmatterFieldHandlers)
fd := newTestFd()
d, _ := time.Parse("2006-01-02", "2018-02-01")
fd.Frontmatter["date"] = d
h := handlers.newDateFieldHandler("date", func(d *FrontMatterDescriptor, t time.Time) { d.Dates.Date = t })
handled, err := h(fd)
assert.True(handled)
assert.NoError(err)
assert.Equal(d, fd.Dates.Date)
}