hugo/resources/page/pagemeta/page_frontmatter.go

785 lines
22 KiB
Go
Raw Normal View History

// Copyright 2024 The Hugo Authors. All rights reserved.
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package pagemeta
import (
"errors"
"fmt"
"path"
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
"strings"
"time"
"github.com/gohugoio/hugo/common/hreflect"
"github.com/gohugoio/hugo/common/htime"
"github.com/gohugoio/hugo/common/hugio"
"github.com/gohugoio/hugo/common/loggers"
"github.com/gohugoio/hugo/common/maps"
"github.com/gohugoio/hugo/common/paths"
"github.com/gohugoio/hugo/hugofs/files"
"github.com/gohugoio/hugo/markup"
"github.com/gohugoio/hugo/media"
"github.com/gohugoio/hugo/resources/kinds"
"github.com/gohugoio/hugo/resources/page"
"github.com/gohugoio/hugo/resources/resource"
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
"github.com/gohugoio/hugo/helpers"
"github.com/gohugoio/hugo/config"
"github.com/spf13/cast"
)
type DatesStrings struct {
Date string `json:"date"`
Lastmod string `json:"lastMod"`
PublishDate string `json:"publishDate"`
ExpiryDate string `json:"expiryDate"`
}
type Dates struct {
Date time.Time
Lastmod time.Time
PublishDate time.Time
ExpiryDate time.Time
}
func (d Dates) IsDateOrLastModAfter(in Dates) bool {
return d.Date.After(in.Date) || d.Lastmod.After(in.Lastmod)
}
func (d *Dates) UpdateDateAndLastmodIfAfter(in Dates) {
if in.Date.After(d.Date) {
d.Date = in.Date
}
if in.Lastmod.After(d.Lastmod) {
d.Lastmod = in.Lastmod
}
}
func (d Dates) IsAllDatesZero() bool {
return d.Date.IsZero() && d.Lastmod.IsZero() && d.PublishDate.IsZero() && d.ExpiryDate.IsZero()
}
// PageConfig configures a Page, typically from front matter.
// Note that all the top level fields are reserved Hugo keywords.
// Any custom configuration needs to be set in the Params map.
type PageConfig struct {
Dates Dates `json:"-"` // Dates holds the four core dates for this page.
DatesStrings
Title string // The title of the page.
LinkTitle string // The link title of the page.
Type string // The content type of the page.
Layout string // The layout to use for to render this page.
Weight int // The weight of the page, used in sorting if set to a non-zero value.
Kind string // The kind of page, e.g. "page", "section", "home" etc. This is usually derived from the content path.
Path string // The canonical path to the page, e.g. /sect/mypage. Note: Leading slash, no trailing slash, no extensions or language identifiers.
Lang string // The language code for this page. This is usually derived from the module mount or filename.
URL string // The URL to the rendered page, e.g. /sect/mypage.html.
Slug string // The slug for this page.
Description string // The description for this page.
Summary string // The summary for this page.
Draft bool // Whether or not the content is a draft.
Headless bool `json:"-"` // Whether or not the page should be rendered.
IsCJKLanguage bool // Whether or not the content is in a CJK language.
TranslationKey string // The translation key for this page.
Keywords []string // The keywords for this page.
Aliases []string // The aliases for this page.
Outputs []string // The output formats to render this page in. If not set, the site's configured output formats for this page kind will be used.
FrontMatterOnlyValues `mapstructure:"-" json:"-"`
Cascade []map[string]any
Sitemap config.SitemapConfig
Build BuildConfig
Menus []string
// User defined params.
Params maps.Params
// Content holds the content for this page.
Content Source
// Compiled values.
CascadeCompiled map[page.PageMatcher]maps.Params
ContentMediaType media.Type `mapstructure:"-" json:"-"`
IsFromContentAdapter bool `mapstructure:"-" json:"-"`
}
var DefaultPageConfig = PageConfig{
Build: DefaultBuildConfig,
}
func (p *PageConfig) Validate(pagesFromData bool) error {
if pagesFromData {
if p.Path == "" {
return errors.New("path must be set")
}
if strings.HasPrefix(p.Path, "/") {
return fmt.Errorf("path %q must not start with a /", p.Path)
}
if p.Lang != "" {
return errors.New("lang must not be set")
}
if p.Content.Markup != "" {
return errors.New("markup must not be set, use mediaType")
}
}
if p.Cascade != nil {
if !kinds.IsBranch(p.Kind) {
return errors.New("cascade is only supported for branch nodes")
}
}
return nil
}
// Compile sets up the page configuration after all fields have been set.
func (p *PageConfig) Compile(basePath string, pagesFromData bool, ext string, logger loggers.Logger, mediaTypes media.Types) error {
// In content adapters, we always get relative paths.
if basePath != "" {
p.Path = path.Join(basePath, p.Path)
}
if p.Params == nil {
p.Params = make(maps.Params)
}
maps.PrepareParams(p.Params)
if p.Content.Markup == "" && p.Content.MediaType == "" {
if ext == "" {
ext = "md"
}
p.ContentMediaType = MarkupToMediaType(ext, mediaTypes)
if p.ContentMediaType.IsZero() {
return fmt.Errorf("failed to resolve media type for suffix %q", ext)
}
}
var s string
if p.ContentMediaType.IsZero() {
if p.Content.MediaType != "" {
s = p.Content.MediaType
p.ContentMediaType, _ = mediaTypes.GetByType(s)
}
if p.ContentMediaType.IsZero() && p.Content.Markup != "" {
s = p.Content.Markup
p.ContentMediaType = MarkupToMediaType(s, mediaTypes)
}
}
if p.ContentMediaType.IsZero() {
return fmt.Errorf("failed to resolve media type for %q", s)
}
if p.Content.Markup == "" {
p.Content.Markup = p.ContentMediaType.SubType
}
if pagesFromData {
if p.Kind == "" {
p.Kind = kinds.KindPage
}
// Note that NormalizePathStringBasic will make sure that we don't preserve the unnormalized path.
// We do that when we create pages from the file system; mostly for backward compatibility,
// but also because people tend to use use the filename to name their resources (with spaces and all),
// and this isn't relevant when creating resources from an API where it's easy to add textual meta data.
p.Path = paths.NormalizePathStringBasic(p.Path)
}
if p.Cascade != nil {
cascade, err := page.DecodeCascade(logger, p.Cascade)
if err != nil {
return fmt.Errorf("failed to decode cascade: %w", err)
}
p.CascadeCompiled = cascade
}
return nil
}
// MarkupToMediaType converts a markup string to a media type.
func MarkupToMediaType(s string, mediaTypes media.Types) media.Type {
s = strings.ToLower(s)
mt, _ := mediaTypes.GetBestMatch(markup.ResolveMarkup(s))
return mt
}
type ResourceConfig struct {
Path string
Name string
Title string
Params maps.Params
Content Source
// Compiled values.
PathInfo *paths.Path `mapstructure:"-" json:"-"`
ContentMediaType media.Type
}
func (rc *ResourceConfig) Validate() error {
if rc.Path == "" {
return errors.New("path must be set")
}
if rc.Content.Markup != "" {
return errors.New("markup must not be set, use mediaType")
}
return nil
}
func (rc *ResourceConfig) Compile(basePath string, pathParser *paths.PathParser, mediaTypes media.Types) error {
if rc.Params != nil {
maps.PrepareParams(rc.Params)
}
// Note that NormalizePathStringBasic will make sure that we don't preserve the unnormalized path.
// We do that when we create resources from the file system; mostly for backward compatibility,
// but also because people tend to use use the filename to name their resources (with spaces and all),
// and this isn't relevant when creating resources from an API where it's easy to add textual meta data.
rc.Path = paths.NormalizePathStringBasic(path.Join(basePath, rc.Path))
rc.PathInfo = pathParser.Parse(files.ComponentFolderContent, rc.Path)
if rc.Content.MediaType != "" {
var found bool
rc.ContentMediaType, found = mediaTypes.GetByType(rc.Content.MediaType)
if !found {
return fmt.Errorf("media type %q not found", rc.Content.MediaType)
}
}
return nil
}
type Source struct {
// MediaType is the media type of the content.
MediaType string
// The markup used in Value. Only used in front matter.
Markup string
// The content.
Value any
}
func (s Source) IsZero() bool {
return !hreflect.IsTruthful(s.Value)
}
func (s Source) IsResourceValue() bool {
_, ok := s.Value.(resource.Resource)
return ok
}
func (s Source) ValueAsString() string {
if s.Value == nil {
return ""
}
ss, err := cast.ToStringE(s.Value)
if err != nil {
panic(fmt.Errorf("content source: failed to convert %T to string: %s", s.Value, err))
}
return ss
}
func (s Source) ValueAsOpenReadSeekCloser() hugio.OpenReadSeekCloser {
return hugio.NewOpenReadSeekCloser(hugio.NewReadSeekerNoOpCloserFromString(s.ValueAsString()))
}
// FrontMatterOnlyValues holds values that can only be set via front matter.
type FrontMatterOnlyValues struct {
ResourcesMeta []map[string]any
}
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
// FrontMatterHandler maps front matter into Page fields and .Params.
// Note that we currently have only extracted the date logic.
type FrontMatterHandler struct {
fmConfig FrontmatterConfig
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
contentAdapterDatesHandler func(d *FrontMatterDescriptor) error
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
dateHandler frontMatterFieldHandler
lastModHandler frontMatterFieldHandler
publishDateHandler frontMatterFieldHandler
expiryDateHandler frontMatterFieldHandler
// A map of all date keys configured, including any custom.
allDateKeys map[string]bool
logger loggers.Logger
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
}
// FrontMatterDescriptor describes how to handle front matter for a given Page.
// It has pointers to values in the receiving page which gets updated.
type FrontMatterDescriptor struct {
// This is the Page's base filename (BaseFilename), e.g. page.md., or
// if page is a leaf bundle, the bundle folder name (ContentBaseName).
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
BaseFilename string
// The content file's mod time.
ModTime time.Time
// May be set from the author date in Git.
GitAuthorDate time.Time
// The below will be modified.
PageConfig *PageConfig
// The Location to use to parse dates without time zone info.
Location *time.Location
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
}
var dateFieldAliases = map[string][]string{
fmDate: {},
fmLastmod: {"modified"},
fmPubDate: {"pubdate", "published"},
fmExpiryDate: {"unpublishdate"},
}
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
// HandleDates updates all the dates given the current configuration and the
// supplied front matter params. Note that this requires all lower-case keys
// in the params map.
func (f FrontMatterHandler) HandleDates(d *FrontMatterDescriptor) error {
if d.PageConfig == nil {
panic("missing pageConfig")
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
}
if d.PageConfig.IsFromContentAdapter {
if f.contentAdapterDatesHandler == nil {
panic("missing content adapter date handler")
}
return f.contentAdapterDatesHandler(d)
}
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
if f.dateHandler == nil {
panic("missing date handler")
}
if _, err := f.dateHandler(d); err != nil {
return err
}
if _, err := f.lastModHandler(d); err != nil {
return err
}
if _, err := f.publishDateHandler(d); err != nil {
return err
}
if _, err := f.expiryDateHandler(d); err != nil {
return err
}
return nil
}
// IsDateKey returns whether the given front matter key is considered a date by the current
// configuration.
func (f FrontMatterHandler) IsDateKey(key string) bool {
return f.allDateKeys[key]
}
// A Zero date is a signal that the name can not be parsed.
// This follows the format as outlined in Jekyll, https://jekyllrb.com/docs/posts/:
// "Where YEAR is a four-digit number, MONTH and DAY are both two-digit numbers"
func dateAndSlugFromBaseFilename(location *time.Location, name string) (time.Time, string) {
withoutExt, _ := paths.FileAndExt(name)
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
if len(withoutExt) < 10 {
// This can not be a date.
return time.Time{}, ""
}
d, err := htime.ToTimeInDefaultLocationE(withoutExt[:10], location)
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
if err != nil {
return time.Time{}, ""
}
// Be a little lenient with the format here.
slug := strings.Trim(withoutExt[10:], " -_")
return d, slug
}
type frontMatterFieldHandler func(d *FrontMatterDescriptor) (bool, error)
func (f FrontMatterHandler) newChainedFrontMatterFieldHandler(handlers ...frontMatterFieldHandler) frontMatterFieldHandler {
return func(d *FrontMatterDescriptor) (bool, error) {
for _, h := range handlers {
// First successful handler wins.
success, err := h(d)
if err != nil {
f.logger.Errorln(err)
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
} else if success {
return true, nil
}
}
return false, nil
}
}
type FrontmatterConfig struct {
// Controls how the Date is set from front matter.
Date []string
// Controls how the Lastmod is set from front matter.
Lastmod []string
// Controls how the PublishDate is set from front matter.
PublishDate []string
// Controls how the ExpiryDate is set from front matter.
ExpiryDate []string
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
}
const (
// These are all the date handler identifiers
// All identifiers not starting with a ":" maps to a front matter parameter.
fmDate = "date"
fmPubDate = "publishdate"
fmLastmod = "lastmod"
fmExpiryDate = "expirydate"
// Gets date from filename, e.g 218-02-22-mypage.md
fmFilename = ":filename"
// Gets date from file OS mod time.
fmModTime = ":filemodtime"
// Gets date from Git
fmGitAuthorDate = ":git"
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
)
// This is the config you get when doing nothing.
func newDefaultFrontmatterConfig() FrontmatterConfig {
return FrontmatterConfig{
Date: []string{fmDate, fmPubDate, fmLastmod},
Lastmod: []string{fmGitAuthorDate, fmLastmod, fmDate, fmPubDate},
PublishDate: []string{fmPubDate, fmDate},
ExpiryDate: []string{fmExpiryDate},
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
}
}
func DecodeFrontMatterConfig(cfg config.Provider) (FrontmatterConfig, error) {
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
c := newDefaultFrontmatterConfig()
defaultConfig := c
if cfg.IsSet("frontmatter") {
fm := cfg.GetStringMap("frontmatter")
2018-08-28 20:51:44 +00:00
for k, v := range fm {
loki := strings.ToLower(k)
switch loki {
case fmDate:
c.Date = toLowerSlice(v)
2018-08-28 20:51:44 +00:00
case fmPubDate:
c.PublishDate = toLowerSlice(v)
2018-08-28 20:51:44 +00:00
case fmLastmod:
c.Lastmod = toLowerSlice(v)
2018-08-28 20:51:44 +00:00
case fmExpiryDate:
c.ExpiryDate = toLowerSlice(v)
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
}
}
}
expander := func(c, d []string) []string {
out := expandDefaultValues(c, d)
out = addDateFieldAliases(out)
return out
}
c.Date = expander(c.Date, defaultConfig.Date)
c.PublishDate = expander(c.PublishDate, defaultConfig.PublishDate)
c.Lastmod = expander(c.Lastmod, defaultConfig.Lastmod)
c.ExpiryDate = expander(c.ExpiryDate, defaultConfig.ExpiryDate)
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
return c, nil
}
func addDateFieldAliases(values []string) []string {
var complete []string
for _, v := range values {
complete = append(complete, v)
if aliases, found := dateFieldAliases[v]; found {
complete = append(complete, aliases...)
}
}
return helpers.UniqueStringsReuse(complete)
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
}
func expandDefaultValues(values []string, defaults []string) []string {
var out []string
for _, v := range values {
if v == ":default" {
out = append(out, defaults...)
} else {
out = append(out, v)
}
}
return out
}
func toLowerSlice(in any) []string {
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
out := cast.ToStringSlice(in)
for i := 0; i < len(out); i++ {
out[i] = strings.ToLower(out[i])
}
return out
}
// NewFrontmatterHandler creates a new FrontMatterHandler with the given logger and configuration.
// If no logger is provided, one will be created.
func NewFrontmatterHandler(logger loggers.Logger, frontMatterConfig FrontmatterConfig) (FrontMatterHandler, error) {
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
if logger == nil {
logger = loggers.NewDefault()
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
}
allDateKeys := make(map[string]bool)
addKeys := func(vals []string) {
for _, k := range vals {
if !strings.HasPrefix(k, ":") {
allDateKeys[k] = true
}
}
}
addKeys(frontMatterConfig.Date)
addKeys(frontMatterConfig.ExpiryDate)
addKeys(frontMatterConfig.Lastmod)
addKeys(frontMatterConfig.PublishDate)
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
f := FrontMatterHandler{logger: logger, fmConfig: frontMatterConfig, allDateKeys: allDateKeys}
if err := f.createHandlers(); err != nil {
return f, err
}
return f, nil
}
func (f *FrontMatterHandler) createHandlers() error {
var err error
if f.contentAdapterDatesHandler, err = f.createContentAdapterDatesHandler(f.fmConfig); err != nil {
return err
}
if f.dateHandler, err = f.createDateHandler(f.fmConfig.Date,
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
func(d *FrontMatterDescriptor, t time.Time) {
d.PageConfig.Dates.Date = t
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
setParamIfNotSet(fmDate, t, d)
}); err != nil {
return err
}
if f.lastModHandler, err = f.createDateHandler(f.fmConfig.Lastmod,
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
func(d *FrontMatterDescriptor, t time.Time) {
setParamIfNotSet(fmLastmod, t, d)
d.PageConfig.Dates.Lastmod = t
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
}); err != nil {
return err
}
if f.publishDateHandler, err = f.createDateHandler(f.fmConfig.PublishDate,
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
func(d *FrontMatterDescriptor, t time.Time) {
setParamIfNotSet(fmPubDate, t, d)
d.PageConfig.Dates.PublishDate = t
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
}); err != nil {
return err
}
if f.expiryDateHandler, err = f.createDateHandler(f.fmConfig.ExpiryDate,
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
func(d *FrontMatterDescriptor, t time.Time) {
setParamIfNotSet(fmExpiryDate, t, d)
d.PageConfig.Dates.ExpiryDate = t
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
}); err != nil {
return err
}
return nil
}
func setParamIfNotSet(key string, value any, d *FrontMatterDescriptor) {
if _, found := d.PageConfig.Params[key]; found {
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
return
}
d.PageConfig.Params[key] = value
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
}
func (f FrontMatterHandler) createContentAdapterDatesHandler(fmcfg FrontmatterConfig) (func(d *FrontMatterDescriptor) error, error) {
setTime := func(key string, value time.Time, in *PageConfig) {
switch key {
case fmDate:
in.Dates.Date = value
case fmLastmod:
in.Dates.Lastmod = value
case fmPubDate:
in.Dates.PublishDate = value
case fmExpiryDate:
in.Dates.ExpiryDate = value
}
}
getTime := func(key string, in *PageConfig) time.Time {
switch key {
case fmDate:
return in.Dates.Date
case fmLastmod:
return in.Dates.Lastmod
case fmPubDate:
return in.Dates.PublishDate
case fmExpiryDate:
return in.Dates.ExpiryDate
}
return time.Time{}
}
createSetter := func(identifiers []string, date string) func(pcfg *PageConfig) {
var getTimes []func(in *PageConfig) time.Time
for _, identifier := range identifiers {
if strings.HasPrefix(identifier, ":") {
continue
}
switch identifier {
case fmDate:
getTimes = append(getTimes, func(in *PageConfig) time.Time {
return getTime(fmDate, in)
})
case fmLastmod:
getTimes = append(getTimes, func(in *PageConfig) time.Time {
return getTime(fmLastmod, in)
})
case fmPubDate:
getTimes = append(getTimes, func(in *PageConfig) time.Time {
return getTime(fmPubDate, in)
})
case fmExpiryDate:
getTimes = append(getTimes, func(in *PageConfig) time.Time {
return getTime(fmExpiryDate, in)
})
}
}
return func(pcfg *PageConfig) {
for _, get := range getTimes {
if t := get(pcfg); !t.IsZero() {
setTime(date, t, pcfg)
return
}
}
}
}
setDate := createSetter(fmcfg.Date, fmDate)
setLastmod := createSetter(fmcfg.Lastmod, fmLastmod)
setPublishDate := createSetter(fmcfg.PublishDate, fmPubDate)
setExpiryDate := createSetter(fmcfg.ExpiryDate, fmExpiryDate)
fn := func(d *FrontMatterDescriptor) error {
pcfg := d.PageConfig
setDate(pcfg)
setLastmod(pcfg)
setPublishDate(pcfg)
setExpiryDate(pcfg)
return nil
}
return fn, nil
}
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
func (f FrontMatterHandler) createDateHandler(identifiers []string, setter func(d *FrontMatterDescriptor, t time.Time)) (frontMatterFieldHandler, error) {
var h *frontmatterFieldHandlers
var handlers []frontMatterFieldHandler
for _, identifier := range identifiers {
switch identifier {
case fmFilename:
handlers = append(handlers, h.newDateFilenameHandler(setter))
case fmModTime:
handlers = append(handlers, h.newDateModTimeHandler(setter))
case fmGitAuthorDate:
handlers = append(handlers, h.newDateGitAuthorDateHandler(setter))
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
default:
handlers = append(handlers, h.newDateFieldHandler(identifier, setter))
}
}
return f.newChainedFrontMatterFieldHandler(handlers...), nil
}
type frontmatterFieldHandlers int
func (f *frontmatterFieldHandlers) newDateFieldHandler(key string, setter func(d *FrontMatterDescriptor, t time.Time)) frontMatterFieldHandler {
return func(d *FrontMatterDescriptor) (bool, error) {
v, found := d.PageConfig.Params[key]
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
if !found {
return false, nil
}
var date time.Time
if vt, ok := v.(time.Time); ok && vt.Location() == d.Location {
date = vt
} else {
var err error
date, err = htime.ToTimeInDefaultLocationE(v, d.Location)
if err != nil {
return false, nil
}
d.PageConfig.Params[key] = date
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
}
// We map several date keys to one, so, for example,
// "expirydate", "unpublishdate" will all set .ExpiryDate (first found).
setter(d, date)
return true, nil
}
}
func (f *frontmatterFieldHandlers) newDateFilenameHandler(setter func(d *FrontMatterDescriptor, t time.Time)) frontMatterFieldHandler {
return func(d *FrontMatterDescriptor) (bool, error) {
date, slug := dateAndSlugFromBaseFilename(d.Location, d.BaseFilename)
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
if date.IsZero() {
return false, nil
}
setter(d, date)
if _, found := d.PageConfig.Params["slug"]; !found {
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
// Use slug from filename
d.PageConfig.Slug = slug
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
}
return true, nil
}
}
func (f *frontmatterFieldHandlers) newDateModTimeHandler(setter func(d *FrontMatterDescriptor, t time.Time)) frontMatterFieldHandler {
return func(d *FrontMatterDescriptor) (bool, error) {
if d.ModTime.IsZero() {
return false, nil
}
setter(d, d.ModTime)
return true, nil
}
}
func (f *frontmatterFieldHandlers) newDateGitAuthorDateHandler(setter func(d *FrontMatterDescriptor, t time.Time)) frontMatterFieldHandler {
return func(d *FrontMatterDescriptor) (bool, error) {
if d.GitAuthorDate.IsZero() {
return false, nil
}
setter(d, d.GitAuthorDate)
return true, nil
}
}