hugo/markup/asciidocext/convert.go

319 lines
8.6 KiB
Go
Raw Normal View History

Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
// Copyright 2020 The Hugo Authors. All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// Package asciidocext converts AsciiDoc to HTML using Asciidoctor
// external binary. The `asciidoc` module is reserved for a future golang
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
// implementation.
package asciidocext
import (
"bytes"
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
"path/filepath"
"strings"
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
"github.com/gohugoio/hugo/htesting"
2020-12-18 17:20:12 +00:00
"github.com/cli/safeexec"
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
"github.com/gohugoio/hugo/identity"
"github.com/gohugoio/hugo/markup/asciidocext/asciidocext_config"
"github.com/gohugoio/hugo/markup/converter"
"github.com/gohugoio/hugo/markup/internal"
"github.com/gohugoio/hugo/markup/tableofcontents"
"golang.org/x/net/html"
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
)
/* ToDo: RelPermalink patch for svg posts not working*/
type pageSubset interface {
RelPermalink() string
}
// Provider is the package entry point.
var Provider converter.ProviderProvider = provider{}
type provider struct{}
func (p provider) New(cfg converter.ProviderConfig) (converter.Provider, error) {
return converter.NewProvider("asciidocext", func(ctx converter.DocumentContext) (converter.Converter, error) {
return &asciidocConverter{
ctx: ctx,
cfg: cfg,
}, nil
}), nil
}
type asciidocResult struct {
converter.Result
toc tableofcontents.Root
}
func (r asciidocResult) TableOfContents() tableofcontents.Root {
return r.toc
}
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
type asciidocConverter struct {
ctx converter.DocumentContext
cfg converter.ProviderConfig
}
func (a *asciidocConverter) Convert(ctx converter.RenderContext) (converter.Result, error) {
content, toc, err := a.extractTOC(a.getAsciidocContent(ctx.Src, a.ctx))
if err != nil {
return nil, err
}
return asciidocResult{
Result: converter.Bytes(content),
toc: toc,
}, nil
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
}
func (a *asciidocConverter) Supports(_ identity.Identity) bool {
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
return false
}
// getAsciidocContent calls asciidoctor as an external helper
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
// to convert AsciiDoc content to HTML.
func (a *asciidocConverter) getAsciidocContent(src []byte, ctx converter.DocumentContext) []byte {
path := getAsciidoctorExecPath()
if path == "" {
a.cfg.Logger.Errorln("asciidoctor not found in $PATH: Please install.\n",
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
" Leaving AsciiDoc content unrendered.")
return src
}
args := a.parseArgs(ctx)
args = append(args, "-")
a.cfg.Logger.Infoln("Rendering", ctx.DocumentName, "with", path, "using asciidoctor args", args, "...")
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
return internal.ExternallyRenderContent(a.cfg, ctx, src, path, args)
}
func (a *asciidocConverter) parseArgs(ctx converter.DocumentContext) []string {
cfg := a.cfg.MarkupConfig.AsciidocExt
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
args := []string{}
args = a.appendArg(args, "-b", cfg.Backend, asciidocext_config.CliDefault.Backend, asciidocext_config.AllowedBackend)
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
for _, extension := range cfg.Extensions {
if strings.LastIndexAny(extension, `\/.`) > -1 {
a.cfg.Logger.Errorln("Unsupported asciidoctor extension was passed in. Extension `" + extension + "` ignored. Only installed asciidoctor extensions are allowed.")
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
continue
}
args = append(args, "-r", extension)
}
for attributeKey, attributeValue := range cfg.Attributes {
if asciidocext_config.DisallowedAttributes[attributeKey] {
a.cfg.Logger.Errorln("Unsupported asciidoctor attribute was passed in. Attribute `" + attributeKey + "` ignored.")
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
continue
}
args = append(args, "-a", attributeKey+"="+attributeValue)
}
if cfg.WorkingFolderCurrent {
contentDir := filepath.Dir(ctx.Filename)
sourceDir := a.cfg.Cfg.GetString("source")
destinationDir := a.cfg.Cfg.GetString("destination")
if destinationDir == "" {
a.cfg.Logger.Errorln("markup.asciidocext.workingFolderCurrent requires hugo command option --destination to be set")
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
}
if !filepath.IsAbs(destinationDir) && sourceDir != "" {
destinationDir = filepath.Join(sourceDir, destinationDir)
}
var outDir string
var err error
file := filepath.Base(ctx.Filename)
if a.cfg.Cfg.GetBool("uglyUrls") || file == "_index.adoc" || file == "index.adoc" {
outDir, err = filepath.Abs(filepath.Dir(filepath.Join(destinationDir, ctx.DocumentName)))
} else {
postDir := ""
page, ok := ctx.Document.(pageSubset)
if ok {
postDir = filepath.Base(page.RelPermalink())
} else {
a.cfg.Logger.Errorln("unable to cast interface to pageSubset")
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
}
outDir, err = filepath.Abs(filepath.Join(destinationDir, filepath.Dir(ctx.DocumentName), postDir))
}
if err != nil {
a.cfg.Logger.Errorln("asciidoctor outDir: ", err)
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
}
args = append(args, "--base-dir", contentDir, "-a", "outdir="+outDir)
}
if cfg.NoHeaderOrFooter {
args = append(args, "--no-header-footer")
} else {
a.cfg.Logger.Warnln("asciidoctor parameter NoHeaderOrFooter is expected for correct html rendering")
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
}
if cfg.SectionNumbers {
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
args = append(args, "--section-numbers")
}
if cfg.Verbose {
args = append(args, "--verbose")
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
}
if cfg.Trace {
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
args = append(args, "--trace")
}
args = a.appendArg(args, "--failure-level", cfg.FailureLevel, asciidocext_config.CliDefault.FailureLevel, asciidocext_config.AllowedFailureLevel)
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
args = a.appendArg(args, "--safe-mode", cfg.SafeMode, asciidocext_config.CliDefault.SafeMode, asciidocext_config.AllowedSafeMode)
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
return args
}
func (a *asciidocConverter) appendArg(args []string, option, value, defaultValue string, allowedValues map[string]bool) []string {
if value != defaultValue {
if allowedValues[value] {
args = append(args, option, value)
} else {
a.cfg.Logger.Errorln("Unsupported asciidoctor value `" + value + "` for option " + option + " was passed in and will be ignored.")
}
}
return args
}
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
func getAsciidoctorExecPath() string {
2020-12-18 17:20:12 +00:00
path, err := safeexec.LookPath("asciidoctor")
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
if err != nil {
return ""
}
return path
}
// extractTOC extracts the toc from the given src html.
// It returns the html without the TOC, and the TOC data
func (a *asciidocConverter) extractTOC(src []byte) ([]byte, tableofcontents.Root, error) {
var buf bytes.Buffer
buf.Write(src)
node, err := html.Parse(&buf)
if err != nil {
return nil, tableofcontents.Root{}, err
}
var (
f func(*html.Node) bool
toc tableofcontents.Root
toVisit []*html.Node
)
f = func(n *html.Node) bool {
if n.Type == html.ElementNode && n.Data == "div" && attr(n, "id") == "toc" {
toc = parseTOC(n)
if !a.cfg.MarkupConfig.AsciidocExt.PreserveTOC {
n.Parent.RemoveChild(n)
}
return true
}
if n.FirstChild != nil {
toVisit = append(toVisit, n.FirstChild)
}
if n.NextSibling != nil && f(n.NextSibling) {
return true
}
for len(toVisit) > 0 {
nv := toVisit[0]
toVisit = toVisit[1:]
if f(nv) {
return true
}
}
return false
}
f(node)
if err != nil {
return nil, tableofcontents.Root{}, err
}
buf.Reset()
err = html.Render(&buf, node)
if err != nil {
return nil, tableofcontents.Root{}, err
}
// ltrim <html><head></head><body> and rtrim </body></html> which are added by html.Render
res := buf.Bytes()[25:]
res = res[:len(res)-14]
return res, toc, nil
}
// parseTOC returns a TOC root from the given toc Node
func parseTOC(doc *html.Node) tableofcontents.Root {
var (
toc tableofcontents.Root
f func(*html.Node, int, int)
)
f = func(n *html.Node, row, level int) {
if n.Type == html.ElementNode {
switch n.Data {
case "ul":
if level == 0 {
row++
}
level++
f(n.FirstChild, row, level)
case "li":
for c := n.FirstChild; c != nil; c = c.NextSibling {
if c.Type != html.ElementNode || c.Data != "a" {
continue
}
href := attr(c, "href")[1:]
toc.AddAt(tableofcontents.Heading{
Text: nodeContent(c),
ID: href,
}, row, level)
}
f(n.FirstChild, row, level)
}
}
if n.NextSibling != nil {
f(n.NextSibling, row, level)
}
}
f(doc.FirstChild, -1, 0)
return toc
}
func attr(node *html.Node, key string) string {
for _, a := range node.Attr {
if a.Key == key {
return a.Val
}
}
return ""
}
func nodeContent(node *html.Node) string {
var buf bytes.Buffer
for c := node.FirstChild; c != nil; c = c.NextSibling {
html.Render(&buf, c)
}
return buf.String()
}
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
// Supports returns whether Asciidoctor is installed on this computer.
func Supports() bool {
if htesting.SupportsAll() {
return true
}
Rework external asciidoctor integration This commit solves the relative path problem with asciidoctor tooling. An include will resolve relatively, so you can refer easily to files in the same folder. Also `asciidoctor-diagram` and PlantUML rendering works now, because the created temporary files will be placed in the correct folder. This patch covers just the Ruby version of asciidoctor. The old AsciiDoc CLI EOLs in Jan 2020, so this variant is removed from code. The configuration is completely rewritten and now available in `config.toml` under the key `[markup.asciidocext]`: ```toml [markup.asciidocext] extensions = ["asciidoctor-html5s", "asciidoctor-diagram"] workingFolderCurrent = true trace = true [markup.asciidocext.attributes] my-base-url = "https://example.com/" my-attribute-name = "my value" ``` - backends, safe-modes, and extensions are now whitelisted to the popular (ruby) extensions and valid values. - the default for extensions is to not enable any, because they're all external dependencies so the build would break if the user didn't install them beforehand. - the default backend is html5 because html5s is an external gem dependency. - the default safe-mode is safe, explanations of the modes: https://asciidoctor.org/man/asciidoctor/ - the config is namespaced under asciidocext_config and the parser looks at asciidocext to allow a future native Go asciidoc. - `uglyUrls=true` option and `--source` flag are supported - `--destination` flag is required Follow the updated documentation under `docs/content/en/content-management/formats.md`. This patch would be a breaking change, because you need to correct all your absolute include pathes to relative paths, so using relative paths must be configured explicitly by setting `workingFolderCurrent = true`.
2020-06-25 07:51:33 +00:00
return getAsciidoctorExecPath() != ""
}